Corsair AIR 5400 RS-R ARGB vs Fractal Design Torrent Black Solidcomputed

Datasheet figures next to each other, and the airflow balance, pressure verdict and case air heating that the fans in each box compute to behind that case's own front. Calculated with the CaseFlow model, not measured.

Side by side

Corsair AIR 5400 RS-R ARGBFractal Design Torrent Black Solid
FormATX mid towerATX mid tower
Volume74.6 L69.8 L
Dimensions470 × 340 × 467 mm544 × 242 × 530 mm
Frontsolid solid or glass frontsolid solid or glass front
Fan mountsfront 3 × 120, top 3 × 120, rear 1 × 120, bottom 3 × 120front 2 × 180, rear 1 × 140, bottom 2 × 180
Radiator supportfront 360 mm, top 360 mm, rear 120 mm, bottom 360 mmfront 420 mm, rear 140 mm, bottom 420 mm
Dust filtersfront, top, bottomfront, bottom
GPU length360 mm461 mm
Cooler height180 mm188 mm
Stock fans3 × RS-R ARGB Series (bottom)2 × Dynamic X2 GP-18 (front), 3 × Dynamic GP-14 (bottom)
Stock airflow, max rpm––
Stock pressure verdictstock fans named but no datasheet - nothing computedstock fans named but no datasheet - nothing computed
Case air at 290 W––
Stock fan noise––
All mounts, reference fans234 in / 211 out CFM 6 / 4 mounts156 in / 66 out CFM 4 / 1 mounts

With a reference pressure-optimized fan on every mount the AIR 5400 RS-R ARGB moves more air. The stock fans of both are named in the datasheets without any figures behind them, so the stock columns stay empty. The pressure verdict describes the stock fan set, not the case: stronger or extra intake fans in the free mounts, or slower exhaust fans, turn a negative balance positive.

AIR 5400 RS-R ARGB — mounts and stock fans

TOPBOTTOMREARFRONT · solid

Torrent Black Solid — mounts and stock fans

TOPBOTTOMREARFRONT · solid

Case air heating with the stock fans — computed

Neither ships with fans the model knows, so there is nothing to plot. Open them in CaseFlow and add fans.

Use it

How these numbers are computed

Each stock fan contributes CFMmax · derate · rpm/rpmmax behind its wall's mounting class: filtered mesh front and side mounts as dust filter, bottom as floor + filter, top and rear as open grille, solid and glass fronts as side-slit intake at roughly half of a mesh front. Front, bottom and side blow in; top and rear blow out.

MountingAirflow bladesPressure-optimized
Open grille0.88 (0.80–0.95)0.88 (0.80–0.95)
Dust filter0.70 (0.60–0.80)0.78 (0.70–0.86)
Floor + filter0.64 (0.52–0.74)0.72 (0.62–0.80)
Solid or glass front0.50 (0.40–0.62)0.58 (0.48–0.68)

Worst case sums intake at the low end of each band and exhaust at the high end; positive there means positive regardless of how the estimates fall. Case air: ΔT = 3.1 · W / throughput (m³/h), with an open-cooler GPU putting its full board power into the case air plus board, RAM and drives. Capacity puts a reference pressure-optimized fan on every mount at max rpm — 120 mm 60 CFM, 140 mm 75 CFM — a generic good fan, not a product.

Mount counts, radiator support and clearances are datasheet figures. Nothing here is measured; the same model runs in CaseFlow.