Datasheet figures next to each other, and the airflow balance, pressure verdict and case air heating that the fans in each box compute to behind that case's own front. Calculated with the CaseFlow model, not measured.
| Corsair FRAME 5000D RS | Corsair FRAME 5000D WOOD RS | |
|---|---|---|
| Form | Mid-Tower | Mid-Tower |
| Volume | 75.3 L | 75.3 L |
| Dimensions | 556 × 250 × 542 mm | 556 × 250 × 542 mm |
| Front | mesh dust filter | mesh dust filter |
| Fan mounts | front 3 × 120/140/200, top 3 × 120/140, rear 1 × 120/140, bottom 4 × 120, side 3 × 120/140 | front 3 × 120/140/200, top 3 × 120/140, rear 1 × 120/140, bottom 1 × 120, side 3 × 120/140 |
| Radiator support | front 420 mm, top 420 mm, rear 140 mm, side 420 mm | front 420 mm, top 420 mm, rear 140 mm, side 420 mm |
| Dust filters | front, bottom | front, bottom |
| GPU length | 450 mm | 450 mm |
| Cooler height | 175 mm | 175 mm |
| Stock fans | 4 × RS120 ARGB 120mm PWM Fan (Revival Series) (front) | 2 × RS200 PWM (front), 1 × RS140 PWM (rear) |
| Stock airflow, max rpm | 227 in / 0 out CFM | – |
| Stock pressure verdict | positive, worst case included | stock fans named but no datasheet - nothing computed |
| Case air at 290 W | +2.3 K | – |
| Stock fan noise | 42.0 dB(A) | – |
| All mounts, reference fans | 524 in / 264 out CFM 10 / 4 mounts | 394 in / 264 out CFM 7 / 4 mounts |
With a reference pressure-optimized fan on every mount the FRAME 5000D RS moves more air. The stock fans of the FRAME 5000D WOOD RS are named without figures behind them, so its stock columns stay empty. The pressure verdict describes the stock fan set, not the case: stronger or extra intake fans in the free mounts, or slower exhaust fans, turn a negative balance positive.
Each stock fan contributes CFMmax · derate · rpm/rpmmax behind its wall's mounting class: filtered mesh
front and side mounts as dust filter, bottom as floor + filter, top and rear as open grille, solid and glass fronts as side-slit intake at
roughly half of a mesh front. Front, bottom and side blow in; top and rear blow out.
| Mounting | Airflow blades | Pressure-optimized |
|---|---|---|
| Open grille | 0.88 (0.80–0.95) | 0.88 (0.80–0.95) |
| Dust filter | 0.70 (0.60–0.80) | 0.78 (0.70–0.86) |
| Floor + filter | 0.64 (0.52–0.74) | 0.72 (0.62–0.80) |
| Solid or glass front | 0.50 (0.40–0.62) | 0.58 (0.48–0.68) |
Worst case sums intake at the low end of each band and exhaust at the high end; positive there means positive regardless of how the estimates fall. Case air: ΔT = 3.1 · W / throughput (m³/h), with an open-cooler GPU putting its full board power into the case air plus board, RAM and drives. Capacity puts a reference pressure-optimized fan on every mount at max rpm — 120 mm 60 CFM, 140 mm 75 CFM — a generic good fan, not a product.
Mount counts, radiator support and clearances are datasheet figures. Nothing here is measured; the same model runs in CaseFlow.