Fractal Design Torrent Black TG Light Tint vs Thermaltake View 390 Aircomputed

Datasheet figures next to each other, and the airflow balance, pressure verdict and case air heating that the fans in each box compute to behind that case's own front. Calculated with the CaseFlow model, not measured.

Side by side

Fractal Design Torrent Black TG Light TintThermaltake View 390 Air
FormATX mid towerATX mid tower
Volume69.8 L70.0 L
Dimensions544 × 242 × 530 mm503 × 287 × 485 mm
Frontmesh dust filtermesh dust filter
Fan mountsfront 3 × 120/140, rear 1 × 120/140, bottom 3 × 120/140front 3 × 120/140/200, rear 2 × 120, bottom 3 × 120, side 3 × 120/140/200
Radiator supportfront 420 mm, rear 140 mm, bottom 420 mmfront 360 mm, side 360 mm
Dust filtersfront, bottombottom
GPU length461 mm420 mm
Cooler height188 mm160 mm
Stock fans2 × Dynamic X2 GP-18 (front), 3 × Dynamic GP-14 (bottom)2 × CT120 (rear)
Stock airflow, max rpm–0 in / 100 out CFM
Stock pressure verdictstock fans named but no datasheet - nothing computednegative: mid -100.3 CFM
Case air at 290 W–+5.3 K
Stock fan noise–28.9 dB(A)
All mounts, reference fans338 in / 66 out CFM 6 / 1 mounts481 in / 106 out CFM 9 / 2 mounts

With a reference pressure-optimized fan on every mount the View 390 Air moves more air. The stock fans of the Torrent Black TG Light Tint are named without figures behind them, so its stock columns stay empty. The pressure verdict describes the stock fan set, not the case: stronger or extra intake fans in the free mounts, or slower exhaust fans, turn a negative balance positive.

Torrent Black TG Light Tint — mounts and stock fans

TOPBOTTOMREARFRONT · mesh

View 390 Air — mounts and stock fans

side mountsTOPBOTTOMREARFRONT · mesh

Case air heating with the stock fans — computed

0 5 10 0 100 200 300 400 450 W GPU (open cooler) + 40 W board View 390 Air K case air above room

Use it

How these numbers are computed

Each stock fan contributes CFMmax · derate · rpm/rpmmax behind its wall's mounting class: filtered mesh front and side mounts as dust filter, bottom as floor + filter, top and rear as open grille, solid and glass fronts as side-slit intake at roughly half of a mesh front. Front, bottom and side blow in; top and rear blow out.

MountingAirflow bladesPressure-optimized
Open grille0.88 (0.80–0.95)0.88 (0.80–0.95)
Dust filter0.70 (0.60–0.80)0.78 (0.70–0.86)
Floor + filter0.64 (0.52–0.74)0.72 (0.62–0.80)
Solid or glass front0.50 (0.40–0.62)0.58 (0.48–0.68)

Worst case sums intake at the low end of each band and exhaust at the high end; positive there means positive regardless of how the estimates fall. Case air: ΔT = 3.1 · W / throughput (m³/h), with an open-cooler GPU putting its full board power into the case air plus board, RAM and drives. Capacity puts a reference pressure-optimized fan on every mount at max rpm — 120 mm 60 CFM, 140 mm 75 CFM — a generic good fan, not a product.

Mount counts, radiator support and clearances are datasheet figures. Nothing here is measured; the same model runs in CaseFlow.