Thermaltake C700 Air vs Thermaltake C750 Air Snowcomputed

Datasheet figures next to each other, and the airflow balance, pressure verdict and case air heating that the fans in each box compute to behind that case's own front. Calculated with the CaseFlow model, not measured.

Side by side

Thermaltake C700 AirThermaltake C750 Air Snow
Formmid towerFull Tower
Volume93.9 L110.7 L
Dimensions506 × 328 × 566 mm599 × 327 × 565 mm
Frontmesh dust filtermesh dust filter
Fan mountsfront 3 × 120/140/200, top 2 × 120/140, rear 3 × 120/140, bottom 3 × 120/140, side 1 × 120/140front 3 × 120/140/200, top 2 × 120/140, rear 3 × 120/140/200, bottom 3 × 120/140, side 3 × 120/140
Radiator supportfront 420 mm, rear 420 mm, bottom 360 mmfront 420 mm, top 240 mm, rear 420 mm, bottom 360 mm, side 420 mm
Dust filtersfront, top, bottom, sidefront, top, bottom, side
GPU length410 mm420 mm
Cooler height190 mm190 mm
Stock fans1 × CT140 (front), 1 × CT140 (top), 1 × CT140 (rear)1 × CT140 (front), 1 × CT140 (top), 1 × CT140 (rear)
Stock airflow, max rpm60 in / 136 out CFM60 in / 136 out CFM
Stock pressure verdictnegative: mid -75.9 CFMnegative: mid -75.9 CFM
Case air at 290 W+3.9 K+3.9 K
Stock fan noise35.3 dB(A)35.3 dB(A)
All mounts, reference fans396 in / 330 out CFM 7 / 5 mounts513 in / 330 out CFM 9 / 5 mounts

With a reference pressure-optimized fan on every mount the C750 Air Snow moves more air. The pressure verdict describes the stock fan set, not the case: stronger or extra intake fans in the free mounts, or slower exhaust fans, turn a negative balance positive.

C700 Air — mounts and stock fans

side mountsTOPBOTTOMREARFRONT · mesh

C750 Air Snow — mounts and stock fans

side mountsTOPBOTTOMREARFRONT · mesh

Case air heating with the stock fans — computed

0 5 0 100 200 300 400 450 W GPU (open cooler) + 40 W board C700 Air C750 Air Snow K case air above room

Use it

How these numbers are computed

Each stock fan contributes CFMmax · derate · rpm/rpmmax behind its wall's mounting class: filtered mesh front and side mounts as dust filter, bottom as floor + filter, top and rear as open grille, solid and glass fronts as side-slit intake at roughly half of a mesh front. Front, bottom and side blow in; top and rear blow out.

MountingAirflow bladesPressure-optimized
Open grille0.88 (0.80–0.95)0.88 (0.80–0.95)
Dust filter0.70 (0.60–0.80)0.78 (0.70–0.86)
Floor + filter0.64 (0.52–0.74)0.72 (0.62–0.80)
Solid or glass front0.50 (0.40–0.62)0.58 (0.48–0.68)

Worst case sums intake at the low end of each band and exhaust at the high end; positive there means positive regardless of how the estimates fall. Case air: ΔT = 3.1 · W / throughput (m³/h), with an open-cooler GPU putting its full board power into the case air plus board, RAM and drives. Capacity puts a reference pressure-optimized fan on every mount at max rpm — 120 mm 60 CFM, 140 mm 75 CFM — a generic good fan, not a product.

Mount counts, radiator support and clearances are datasheet figures. Nothing here is measured; the same model runs in CaseFlow.