CaseCalc › CaseDatabase › The Tower 600 Bumblebee

Thermaltake The Tower 600 Bumblebeecomputed

Fan mounts, radiator support and clearances from the datasheet; the airflow balance, pressure verdict and case air heating with the stock fans computed with the CaseFlow model. Not measured; bands as on the fan pages.

Datasheet figures and what they compute to

FormATX mid tower550 × 420 × 286 mm · 66.1 L
Frontglasssolid or glass front
GPU length400 mm
Cooler height210 mm
Stock fans, max rpm0 in / 136 out CFMworst case -147.1 · computed
All mounts, reference fans563 in / 594 out CFM11 intake, 9 exhaust mounts · computed

Negative pressure with the stock fans: mid estimate -136.2 CFM. Air comes in through the gaps instead of the filters. At max rpm the stock fans move 136 CFM; 290 W into the case air is +3.9 K. Stock fans: 33.5 dB(A).

Mounts and stock fans

side mountsTOPBOTTOMREARFRONT · glass

Case air heating, stock fans — computed

0 5 10 0 100 200 300 400 450 W GPU (open cooler) + 40 W board stock fans 50 % stock fans 100 % K case air above room

Walls

WallMountsRadiator up toFilterMounting class · directionStock fans
front3 × 120––solid or glass front · intake–
top5 × 120/140–yesopen grille · exhaust2 × CT140
rear4 × 120/140––open grille · exhaust–
bottom2 × 120/140–yesfloor + filter · intake–
side6 × 120/140420 mmyesdust filter · intake–

Use it

Other cases

How these numbers are computed

Each stock fan contributes CFMmax · derate · rpm/rpmmax behind its wall's mounting class: filtered mesh front and side mounts as dust filter, bottom as floor + filter, top and rear as open grille, solid and glass fronts as side-slit intake at roughly half of a mesh front. Front, bottom and side blow in; top and rear blow out.

MountingAirflow bladesPressure-optimized
Open grille0.88 (0.80–0.95)0.88 (0.80–0.95)
Dust filter0.70 (0.60–0.80)0.78 (0.70–0.86)
Floor + filter0.64 (0.52–0.74)0.72 (0.62–0.80)
Solid or glass front0.50 (0.40–0.62)0.58 (0.48–0.68)

Worst case sums intake at the low end of each band and exhaust at the high end; positive there means positive regardless of how the estimates fall. Case air: ΔT = 3.1 · W / throughput (m³/h), with an open-cooler GPU putting its full board power into the case air plus board, RAM and drives. Capacity puts a reference pressure-optimized fan on every mount at max rpm — 120 mm 60 CFM, 140 mm 75 CFM — a generic good fan, not a product.

Mount counts, radiator support and clearances are datasheet figures. Nothing here is measured; the same model runs in CaseFlow.